How to replace shower faucet? Step-by Step Guide

 

Shower faucets are one of the most crucial components in your bathroom. Standard shower faucet components include: showerhead and valve. Nowadays, shower faucets not only serve the purpose of mixing cot and hot water for your shower, but also can be a unique element of your bathroom design style. If you are considering to give you’re a bathroom a new look, your first choice would be to replace shower faucets. Another reason, you might consider to change shower faucet is when you encounter shower faucet leak or leaking shower head. This article will guide you through step-by-step process of how to replace shower faucet by your own means and tools. Even if you don’t have any experience in plumbing, shower faucet replacement is a relatively simple process. Just follow our Step-by- Step Guide.

 

shower faucet replacement

Tools and Materials Needed:

  • New shower faucet components
  • Protective cloth
  • Screwdriver/flathead screwdriver
  • Adjustable wrench/pliers
  • Teflon tape
  • Slip-jaw pliers
  • Acrylic caulk

Step 1: Choose type of fitting shower faucet

The first step is to identify which type of shower faucet you need. Although, it seems like an easy task, you still need to be careful when choosing the one. There are dozens of shower faucets available on the market. Although, there are a lot of shower faucets that are made universal and can fit any bathroom type, there still those that are not. Our advice would be either to go ahead and buy universal type of shower faucet or alternatively- take your old shower faucet to the shop and ask experienced sales representative to match you type of the faucet.

Shower Faucet Models:

Single handle shower faucet

Single handle shower faucet

 

Single handle shower faucets are the most popular choice. One-handle design allows to control both water flow and temperature of the shower at the same time.

Two handle shower faucet 

 Is used for more traditional type look of the bathroom. It has two separate handles: one for hot water and anther one for cold water. When mixing the water you should use both handles to reach the desired temperature level.

 Three handle shower faucet 

 This type of shower head faucets is commonly used at hotels. It has a very distinctive design: two shower handles and a diverter. The two shower handles serve exactly same purpose as in two handle shower faucet, while the diverter conducts water flow from tub faucet to the shower head.

Once you have your type of shower faucet purchases and tools ready, move in to the next step.

Step 2: Turn of the water supply

Before you consider shower faucet replacement, your most important step is to shut off the water supply. If you have a separate shut off water valve (usually located near the tank of the main outlet pipe) you should cut off supply from there. In case you don’t- shut off the water supply of the whole house/apartment. Don’t skip this step, because you might face serious wall water damage if you ignore this step!

Step 3: Remove old shower handle/Removing Shower faucet

Generally the faucets have a detachable cap which covers the screw of the handle. In order to pop it off, you have to slide a flat screwdriver into it. Than you will see a screw below it, unscrew it counterclockwise while holding carefully the shower handle in process.  If the screws are rustic give a little bit additional effort or consider using oil or WD-40 After that pull it off from the shower mount. Do exactly same procedure with other shower faucets.

Step 4: Remove the spout

To eliminate the old spout, turn counterclockwise gently and  draw it towards you at the same time. There might be a small screw that will certainly have to be removed before you can take it off. You may discover that pliers or a pipe wrench are practical to use when getting rid of old components. Use what devices work best for you. On some faucets/taps, the diverter you are dealing with, will have an arrow on it. Make use of a flat head screwdriver or a butter blade or something similar to tear the cap from the manage to disclose the preserving screw. Before removing the retaining screw, you will have to open the valve by turning the handle counterclockwise. This keeps the valve from turning while you are busy removing  the screw.

Step 5: Remove shower flange

On many two-handle and three-handle faucets, there are chrome flanges concerning three inches long. Strongly grasp the flange and also remove it by turning it counterclockwise. There is a white nylon threaded sleeve that might not come off as you remove the flange. If this happens, simply comprehend the sleeve with your hand or a set of pliers and also transform it counterclockwise to remove it. Single-handled taps have a huge round plate that is affixed either with caulking or with screws. After removing the handle, eliminate home plate by getting rid of the screws or by reducing the caulking with an utility knife. Then pull the plate from the wall surface.

Step 5: Remove the valve assemblies

These must have a hex-shaped base near the wall as well as you can use an adjustable wrench or flexible pliers to eliminate them. Transform them counterclockwise until they come loose. When removed, utilize a damp cloth or an old tooth brush to remove debris from the strings of the water inlet pipes.

Step 6: How to install a shower valve

Open and also check the shutoff assemblies before installment. Take all of the new shutoff settings up as well as open them totally prior to mounting them. Do this by transforming the stems counterclockwise. Each valve requires to be opened when it’s installed to permit it to seat completely on the pipe parts. Be sure to determine the diverter shutoff as well as established it aside to install it last. The process of mounting a brand-new faucet will certainly be vital the reverse process of your disassembly. If you acquired a the same or comparable set to the version you eliminated, it needs to be quite very easy.

Step 7: Taping new valves

Tape the brand-new valves. Take the roll of plumbing professional’s tape and also peel off completion back a number of inches. With the new shutoff in one hand, hold the threaded base indicating your various other hand. Area the loose end of the plumbing’s tape over the threads and also protect it with your thumb, then cover snugly around the threads clockwise for three complete wraps. Pull snugly versus the strings up until the tape breaks. Roll the loose end over the taped threads. Done correctly, the tape will certainly contour to the strings. Repeat this process for all the brand-new valve components. Taping the shutoffs allows a tighter seal to be producing, making certain a solid tap that won’t leak.

Step 8: Install the new valve

Area the new shutoff into the pipeline and transform clockwise with your fingers regarding 3 or 4 total turns. There must be some resistance afterwards due to the plumbing technician’s tape.  If the shutoff does not seat in the threaded pipe within the first turn or more, start once again. Do not compel a poorly seated shutoff. It will remove the threads and also trigger a severe leakage. Repeat this action for all shutoffs. Totally tighten the valves with flexible pliers or an adjustable wrench. Do not over-tighten or you run the risk of damaging the shutoff or the pipes

Step 9: Installing the sleeve

Mount the sleeve. Take the threaded white nylon sleeve, slide it over each shutoff stem, and also twist it right into threaded interior of the valve base. Do not make use of pliers or a monkey wrench, as this will harm the threads. Wrap a cloth dust cloth around the sleeve and also hold firmly with your hand and also spin it right into area.

Step 10: Installing shower flange

Set up the flange. Take the chrome flange as well as twist it onto the nylon sleeve up until the base of the flange is snug versus the shower wall surface. Location the new faucet handle over the scratched pointer of the shutoff stem. Hold the deal with securely and also insert as well as tighten up the keeping screw. Do not over tighten to avoid removing the strings. Transform the take care of clockwise to shut the valve and also location the handle in the shut-off position. Repeat these actions for each and every of the shutoffs.

Step 11: Installing the retaining screw and checking for leaks

Install the preserving screw cover on each take care of. Insert the covers so “H” gets on the left side, “C” gets on the appropriate side, and the arrowhead on the diverter cap is aiming down.

Usage bathtub caulk to secure any type of gaps where hardware fulfills the shower wall. Caulk the components where they touch the wall surfaces making use of a silicon caulk, and enable to dry. As a whole, you should not utilize a newly caulked shower for at least 1 day.

Turn supply of water back on and also look for leakages. Activate your water and also examine that everything works effectively. Do not be amazed by some first sputtering of the water when you evaluate your shower faucets. The water pressure is merely requiring air out of the line. The sputtering need to quit within a few secs.

Congratulations now you know now you know how to replace shower faucet and hot to install shower faucets. Additionally, we also touched based on the topic of how to replace shower valve.

Add a Comment

Your email address will not be published. Required fields are marked *